Double Wire Air Borne Drying Pulp Machine 夹网气垫干燥浆板机

Features

Double Wire Air Borne Drying Pulp Machine is a kind of specialized equipment for producing commercial pulp, mainly used for producing dry pulp sheet with Wood Pulp,Bamboo Pulp,Straw Pulp, Sugarcane Pulp,Kenaf Pulp, Hemp Pulp and Cotton Pulp as its raw materials.
The machine mainly consists of Consistency Headbox,Double Wire Forming Seciton,Big-dia.Roll Press Section and Hot Air Dryer.in April 2007,it passed the Provincial Appraisal of the New Products,and it can substitute for imported products because of its advanced technical performance.

Advantage
Use high consistency headbox to improve pulp approaching consistency and lower power consumption in pulp delivery;
In double wire forming section, reduce or cancel vacuum dewatering parts to reduce power consumption and extend the life service of the wire, also to improve the pulp sheet dryness out of the wire section;
Use big-diameter roll to improve the pulp sheet dryness out of the press section and reduce steam consumption;
Dry pulp sheet with hot air, thus there is no hornifcation and the surface of the pulp sheet can not easily turn yellow so as to improve the quality of pulp sheet;
Hot air is circulated in closed equipment to increase the utilizing rate and the steam consumption is reduced by 35%;
Use hot air to dry and hold the pulp sheet, thus the tension is small and the pulp sheet is dried and shrinked evenly so that it is not easily broken;
Easily maintained and low maintenance cost;
Air cooling chamber which lowers the pulp sheet temperature out of the dryer section brings long-term storage of pulp sheet;
The area occupied by equipment is reduced by 35% and building area is reduced by 60%, thus the civil engineering investment is lowered.

Features

Trimmed Width		2400~6600mm
Operating Speed		50~250 m/min
Basis Weight		600~1200 g/m2